2GIG EDGE
Minimum firmware: 1.3+
Both the Z-Wave controller (i.e., security panel, hub, module, etc.) and the Z-Wave device must be Z-Wave Long Range (Z-Wave LR)-enabled.
For information about Z-Wave LR and adding devices, see What is Z-Wave Long Range (Z-Wave LR)?.

2GIG EDGE
Minimum firmware: 1.3+

Qolsys IQ Hub
Minimum software: 4.5.0+

Qolsys IQ4 Hub
Minimum software: 4.5.0+

Qolsys IQ Pro
Minimum software: 4.5.0+

Qolsys IQ4 NS
Minimum software: 4.5.0+

Qolsys IQ Panel 4
Minimum software: 4.5.0+
*Important: Qolsys IQ Panel 2s that are upgraded to 2.6.0 from a previous version may not be compatible. The software version of the panel at its date of manufacture must be at least 2.4.2 since this includes the Z-Wave version 6.81.03.
.png?revision=1)
Ecolink Z-Wave Plus Garage Controller
GDZW7-ECO
.png?revision=1)
inovelli Z-Wave Long Range Smart Dimmer
VZW31-SN
.png?revision=1)
Jasco Pro Series Plug-In Smart Switch
79244 / ZWN4109
.png?revision=1)
Jasco Enbrighten 800 Series Outdoor Plug-in Switch
76721
.png?revision=1)
Jasco_Enbrighten In-Wall Smart Switch
76592
.png?revision=1)
Jasco Enbrighten Z-Wave In-Wall Paddle Switch
76591
_Actual.png?revision=1)
JascoPro Plug-In Dimmer
76723
.png?revision=1&size=bestfit&width=250&height=250)
JascoPro Plug-In Switch
76724
.png?revision=1&size=bestfit&width=250&height=250)
Jasco Enbrighten 800 Series Outdoor Plug-in Switch
76721

JascoPro In-Wall Dimmer
76596/76597

JascoPro Outdoor Plug-In Switch
76721/76722

Shelly Qubino Z-Wave Smart Switch
Wave 1

Shelly Z-Wave Smart Switch
Wave 1PM

Zooz 800LR Scene Controller
ZEN32

Zooz 800LR Remote Switch
ZEN34

Zooz 800LR Wall Remote
ZEN37

Zooz LR Outdoor Smart Plug
ZEN05

Zooz 800LR In-Wall Switch
ZEN77

Alfred Mortise Lock
ML2

Alfred DB2S Lock
DB2S

Alfred DB1 Pro Lock
DB1 Pro

Kwikset Home Connect
918

Kwikset/Weiser Home Connect
620
.png?revision=1)
Philips Smart Deadbolt
DDL240X-1HB

Aeotec Home Energy Meter 8
ZWA046
Note: The Alarm.com Water Dragon™ has not been fully released.

Alarm.com Water Dragon™
ADC-SHM-100-A