Ultraloq Bolt Z-Wave® Deadbolt

Device Image
Manufacturer	Ultraloq
User Code Limit	250
Digits in User Code	4-8
Keypad Layout	10 buttons with ULTRALOQ button
Auto Re-Lock Option	Yes
Z-Wave Security 2 (S2)	Yes
Z-Wave SmartStart	Yes
Z-Wave Long Range	Yes
Z-Wave Enrollment	If the Z-Wave controller is not SmartStart or S2-compatible, this device can be enrolled in the traditional way as an S0 device. Place the Z-Wave controller into Add Mode. Press and hold the ULTRALOQ button for 3 seconds. You will hear two beeps, see a flashing blue light, and the internal LED will flash green. The lock is now in setup mode (add mode).
Factory Reset	Use a Reset Needle to press the Reset button under the battery cover for 10 seconds, until you hear 1 long beep followed by 2 short beeps.