Indoor Fixed Pan/Tilt (ADC-V620PT)
Quick Facts
| Device image |  |
|---|---|
| Live view resolution | 1280x800, 640x400, 320x200, 176x144 |
| Field of view | 77° (horizontal) 54° (vertical) |
| Night vision | No infrared night vision, sensitivity: 0.3 lux at 1/5 sec |
| Enrollment methods |
WPS, Ethernet For enrollment information, see Indoor Fixed PanTilt (ADC-V620PT) - Installation Guide. |
| Ethernet compatibility |
Has 10/100 Mbps RJ-45 Ethernet port Not compatible with PoE |
| Wi-Fi compatibility | Compatible with 802.11 b/g/n, 2.4 GHz connections |
| Video Motion Detection |
Compatible For Video Motion Detection (VMD) setup instructions, see Configure Video Motion Detection (VMD) settings for a video device. |
| Video Analytics | Not compatible |
| Onboard Recording | Not compatible |
| Two-Way Audio | Not compatible |
| Factory Reset |
Location: The Reset button can be found in the back pinhole, near the seam to the left of the antenna if facing the back of the camera. Procedure: Hold the Reset button until LED rapidly flashes red and green, which usually happens after 15 seconds. For more details about the factory reset process, see Factory reset an ADC-V620PT to its default settings. |
Data sheets
Installation guides
- Indoor Fixed PanTilt (ADC-V620PT) - Installation Guideinstall an ADC-V620PT indoor pan-tilt camera by connecting power, joining the camera to the network with WPS or Ethernet, enrolling it to the Alarm.com account, and then mounting it in its final location.
How-to troubleshooting guides
Frequently asked questions
General information
- Change the Wi-Fi network settings of a video deviceYou can change a video device's network information manually using the Customer website as long as the device has power and is still connected to an active network.
- Reconnect a camera to a wireless network if the router, equipment, or Wi-Fi settings change
- Request the wireless signal strength of a video deviceVideo device wireless signal strength can be checked remotely for devices on the customer account at any time using the Customer app or Customer website, or during installation for supported devices using the Customer app. It is generally recommended for video devices to have at least 66% wireless signal strength.