Indoor Fixed w/IR (ADC-V520IR)
Quick Facts
| Device image |
|
|---|---|
| Live view resolution | 1280x800, 640x400, 320x200, 176x144 |
| Field of view | 60° (horizontal) 39° (vertical) |
| Night vision | 0 lux with infrared, up to 6 meters (~15 feet) |
| Enrollment methods |
WPS, Ethernet For enrollment instructions, see Indoor Fixed wIR (ADC-520IR) - Installation Guide. |
| Ethernet compatibility |
Has 10/100Mbps RJ-45 Ethernet port, no PoE |
| Wi-Fi compatibility | Compatible with 802.11 b/g/n, 2.4 GHz connections |
| Video Analytics |
Not compatible |
| Video Motion Detection |
Compatible For Video Motion Detection (VMD) setup instrcutions, see Configure Video Motion Detection (VMD) settings for a video device. |
| Onboard Recording | Not compatible |
| Two-Way Audio | Not compatible |
| Factory Reset |
Location: The Reset button can be found in the pinhole on the back bottom left corner of the device. Procedure: Hold the Reset button until LED rapidly flashes red and green, which usually happens after 15 seconds. For more details about the factory reset process, see Factory reset an ADC-V520IR to its default settings. |
Data sheets
Installation guides
- Indoor Fixed wIR (ADC-520IR) - Installation GuideInstall an ADC-V520IR camera by connecting power, using WPS or Ethernet to join the network, then adding the device through the Customer app Video Installation Wizard or at www.alarm.com/addcamera with the customer’s Alarm.com login. . The guide also explains how to finish mounting after enrollment and how to interpret camera LED patterns for internet connection, local network status, power-up, firmware updates, WPS mode, privacy mode, and factory reset.
Frequently asked questions
- What are the terminals on the ADC-V520IR for?The wiring terminals on Alarm.com video devices are digital inputs that let a hard‑wired sensor, such as a PIR motion sensor, trigger video recordings instead of camera‑based motion detection.