180° HD Camera (ADC-V622)
| Device image |  |
|---|---|
| Live view resolution | 1920x1080 |
| Field of view | 180° |
| Night vision |
0 lux with IR, up to 5 meters (~15 feet) |
| Enrollment methods |
AP mode, WPS, Ethernet For enrollment instructions, see 180° HD Camera (ADC-V622) - Installation Guide. |
| Ethernet compatibility |
10/100Mbps RJ-45 Ethernet port Compatible with PoE |
| Wi-Fi compatibility | Compatible with 802.11 b/g/n, 2.4 & 5 GHz Wi-Fi connections |
| Video Motion Detection |
Compatible For Video Motion Detection (VMD) setup instructions, see Configure Video Motion Detection (VMD) settings for a video device. |
| Video Analytics |
Video Analytics 1.0 on firmware version 0.5.3.113+ For Video Analytics setup instructions, see Configure a Video Analytics rule. |
| Onboard Recording | Incompatible |
| Two-Way Audio |
Half-Duplex For more information about setting up Two-Way Audio, see Two-Way Audio Installation and User Guide. |
| Factory Reset | Procedure:
|
Data sheets
Installation guides
Videos
- ADC-V622 Installation - Placing the cameraADC-V622 Installation - Placing the camera
- ADC-V622 Installation - Connecting to Wi-FiConnecting V622 to network
- ADC-V622 Installation - Using Two-Way AudioUsing Two-Way Audio on V622
How-to troubleshooting guides
General information
- Connect a video device using Power-Over-Ethernet (PoE)
- How does Power-over-Ethernet (PoE) work with Alarm.com video devices?
- How well can Alarm.com cameras see in the dark? (night vision, infrared)
- Two-Way Audio Installation and User GuideTwo-Way Audio lets users talk and listen remotely through compatible video devices and hear recorded audio in saved clips. It works in the Customer app, Customer website, and on some supported panels when live video streaming is enabled. Supported cameras use either Half-Duplex audio, which requires pressing and holding to talk, or Full-Duplex audio, which allows simultaneous speaking and listening.
- Video Analytics best practices
- What is the difference between Half-Duplex and Full-Duplex audio?♦ Half-Duplex audio allows only one communication channel to be used at a time, similar to a walkie-talkie or traditional two-way radio. These devices require the user to manually enable and disable the camera's microphone and speaker. ♦ Full-Duplex audio allows both communication channels to speak and listen simultaneously, similar to a telephone call. These devices require the user to tap or click the microphone icon once to toggle on microphone and speaker functionality during a stream.
- What is the maximum distance of Power-over-Ethernet (POE)?
- When does live or saved video contain audio?
- Which video devices support Video Analytics?Cameras that are compatible with Video Analytics can detect and record people/animals/vehicles that pass through or linger in areas of interest.