What do the LEDs on the ADC-V622 mean?
| LED pattern | Status | Description |
|---|---|---|
|
Solid green
|
Connected to internet | Local network and internet connection with Alarm.com IP. |
|
Blinking green
|
Local network connection |
Local network connection with local IP address, no internet. Note: If the LED does not go to a solid green after a few minutes, see Camera LED is blinking green. |
|
Solid red
|
No network connection |
No local or Internet connection. |
|
Blinking red
|
System booting | Camera is booting. This typically takes 60-90 seconds. |
|
Blinking blue
|
WPS mode |
WPS mode is active. To enter WPS mode, press the Menu button and use the Volume buttons to scroll to WPS Mode. |
|
Blinking white
|
AP mode |
Wi-Fi access point (AP) mode is active. To enter AP mode, press the Menu button and use the Volume buttons to scroll to Access Point Mode. |
|
Blinking amber
|
Bluetooth pairing |
Bluetooth pairing mode is active. To pair with Bluetooth, press the Menu button and use the Volume buttons to scroll to Bluetooth mode. |
|
Blinking red and green
|
Factory reset |
The camera is restoring to factory default settings. Caution: If the camera is already installed, it may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, press the Menu button and use the Volume buttons to scroll to the Factory Reset option. Follow the audio prompts to initiate a factory reset. |
|
Solid purple
|
Audio prompt menu | The camera is entering or exiting the menu. |
