Skip to main content
Knowledge Base

Factory reset an ADC-V622 to its default settings

  1. Last updated
  2. Save as PDF

Resetting a video device to its factory defaults removes all programming and memory from the device.

Important: Wait at least 2 minutes for the device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.

 Reset procedure ADC-V622 image
  1. Press the menu button.
  2. Use the volume buttons to scroll to the factory reset option.
  3. Follow the audio prompts to initiate a factory reset.
  4. Wait for the device to reboot.
 ADC-V622 menu.png

Important: If the camera was previously installed on a different Alarm.com account, it will need to be deleted before it can be installed again.