Outdoor Wireless (ADC-V721W)
Quick Facts
| Device image |  |
|---|---|
| Live view resolution | 1280x960, 800x600, 640x480, 320x240, 176x144 |
| Field of view | 62º (horizontal), 38º (vertical) |
| Night vision |
0 lux with IR on, up to 40 Feet (12 meters) |
| Enrollment methods |
AP mode, WPS For enrollment instructions, see Outdoor Wireless (ADC-V721W) - Installation Guide. |
| Ethernet compatibility | Not compatible |
| Wi-Fi compatibility | Compatible with 802.11 b/g/n, 2.4 GHz connections |
| Video Motion Detection |
Compatible For Video Motion Detection (VMD) setup instructions, see Configure Video Motion Detection (VMD) settings for a video device. |
| Video Analytics | Not compatible |
| Onboard Recording | Not compatible |
| Two-Way Audio | Not compatible |
| Factory Reset |
Location: The Reset button is located in the same place as the WPS button, which is on the back of the camera. Procedure: Hold the Reset button until LED rapidly flashes red and green, which usually happens after 15 seconds. For more details about the factory reset process, see Factory reset an ADC-V721W to its default settings. |
Data Sheets
Installation Guides
Frequently Asked Questions
- What do the LEDs on the ADC-V721W mean?The LEDs on the ADC‑V721W camera indicate power, network status, and operating modes.
General information
- Change the Wi-Fi network settings of a video deviceYou can change a video device's network information manually using the Customer website as long as the device has power and is still connected to an active network.
- How well can Alarm.com cameras see in the dark? (night vision, infrared)
- Reconnect a camera to a wireless network if the router, equipment, or Wi-Fi settings change