Varifocal Bullet Camera (ADC-VC728PF)

Ethernet

For enrollment instructions, see Varifocal Bullet Camera (ADC-VC728PF) - Installation Guide.

Video Analytics 1.0

For Video Analytics setup instructions, see Configure a Video Analytics rule.

For Business Activity Analytics setup instructions, see Business Activity Analytics (BAA) setup.

Compatible

For Video Motion Detection setup instructions, see Configure Video Motion Detection (VMD) settings for a video device.

Compatible

For Onboard Recording setup instructions, see Onboard Recording (SD card) with Smart View for video devices.

1. Press and hold the Reset button until the LED is flashing Green and Red (about 15 seconds), then release the button.
2. The camera will reboot with factory defaults. If the camera was previously installed to an Alarm.com account, it will need to be deleted before it can be installed again.