1 Channel Video Server (ADC-VS121)

Device image
Live view resolution	704x480, 352x240, 176x120
Field of view	Depends on the analog camera.
Night vision	Depends on the analog camera.
Enrollment methods	Ethernet For more information about enrolling this video device, see 1 Channel Video Server (ADC-VS121) - Installation Guide.
Ethernet compatibility	Has 10/100 Mbps RJ-45 Ethernet port. Not compatible with PoE.
Wi-Fi compatibility	Not compatible with Wi-Fi.
Recording features	Video Motion Detection: All hardware and firmware versions. For more information about how to set up a Video Motion Detection recording rule, see Configure Video Motion Detection (VMD) settings for a video device. Video Analytics: Not compatible.
Two-Way Audio	Not compatible with Two-Way Audio.
Factory Reset	Location: The [Reset] button can be found in the pinhole labeled Reset. Procedure: Press and hold the [Reset] button until the LED flashes red and green rapidly. This usually happens after 15 seconds. For more information about resetting this video device to is factory defaults, see Factory reset an ADC-VS121 to its default settings.

What types of cameras are not supported by the ADC-VS121?Alarm.com video servers only support true analog cameras, so compatibility depends on the camera being able to output a standard analog signal rather than HD analog formats.

For a complete list of general video device articles, see General Video Information.