Factory reset an ADC-VS121 to its default settings
Resetting a device to its factory default settings removes all of its existing programming and memory. Most devices must be removed from the account and re-enrolled after a factory reset.
Important: Wait at least 2 minutes for the device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.
| Reset procedure | Reset button location | Reset button image |
|---|---|---|
|
Press and hold the [Reset] button until the LED flashes red and green rapidly. This usually happens after 15 seconds.
|
The [Reset] button is inside the pinhole labeled Reset. |  |
Once a video device is reset, it is normal for the LED to turn off momentarily. It is recommended to leave the video device powered on and undisturbed for 2 minutes after the device reset.