2GIG HD100 Video Camera
Quick Facts
| Device image |  |
|---|---|
| Live view resolution | 1280x720 |
| Field of view | - |
| Night vision | Infrared (IR), up to 5 meters |
| Enrollment methods |
WPS, Ethernet For enrollment instructions, see 2GIG HD100 Camera - Installation Guide. |
| Ethernet compatibility |
Has a 10/100 Mbps RJ-45 Ethernet port Not compatible with PoE |
| Wi-Fi compatibility | Compatible with 802.11 b/g/n, 2.4 GHz connections |
| Video Motion Detection |
Compatible For Video Motion Detection (VMD) setup instructions, see Configure Video Motion Detection (VMD) settings for a video device. |
| Video Analytics | Not compatible |
| Onboard Recording | Not compatible |
| Two-Way Audio | Not compatible |
| Factory Reset |
Location: B button on the back of the camera. Procedure: Press and hold the B button until the LED changes to yellow, which takes approximately 10 seconds. Release the B button. For more details about the factory reset process, see 2GIG HD100 Camera - Installation Guide. |
Data sheets
Installation guides
User guides
- Change the 2GIG HD100 operational modeThe 2GIG HD100 has two operational modes that can be selected during the camera boot-up, Go!2.0 and Go!Control/Alarm.com (default).
How-to troubleshooting guides
Frequently asked questions
- Can the 2GIG HD100 be used outdoors?The 2GIG HD100 is meant for indoor use only.
- What do the LEDs on the 2GIG HD100 mean?The LEDs on the 2GIG HD100 camera indicate power, network status, setup modes, and updates.
General information
- Change the Wi-Fi network settings of a video deviceYou can change a video device's network information manually using the Customer website as long as the device has power and is still connected to an active network.
- How well can Alarm.com cameras see in the dark? (night vision, infrared)
- Reconnect a camera to a wireless network if the router, equipment, or Wi-Fi settings change
- Request the wireless signal strength of a video deviceVideo device wireless signal strength can be checked remotely for devices on the customer account at any time using the Customer app or Customer website, or during installation for supported devices using the Customer app. It is generally recommended for video devices to have at least 66% wireless signal strength.