Remotely manage, arm, and disarm multiple partitions
A secondary partition appears on an account after the partition is enabled in the security panel and has at least one sensor associated with it. There are no additional service package costs to remotely control or use partitions on a customer account.
The arming level of a partition can be set to the desired status by clicking an individual partition to arm or disarm. A customer can remotely arm and disarm separate partitions individually using either the Alarm.com customer website or Alarm.com app. Partitions are listed in alphabetical order in the Alarm.com app to help organize systems with large amounts of partitions.
Note: SEM - Honeywell/ADEMCO Vista 20P panels have a common partition (partition 3) that arms to the lowest arming state depending on the other two partitions (e.g., if Partition 1 = Arm Away and Partition 2 = Arm Stay, then Partition 3 = Arm Stay, if Partition 1 = Disarmed and Partition 2 = Arm Stay, then Partition 3 = Disarmed).
Remotely arm and disarm individual partitions
Individual partitions can be armed and disarmed using the Alarm.com customer website and Alarm.com app.
To remotely arm and disarm individual partitions using the Alarm.com customer website:
- Log in to the Alarm.com customer website.
- In the Security System card, click any partition.
Note: The arming states can also be changed from the Partitions page by clicking
in the Security System card. - Click to select the desired arming state.
To remotely arm and disarm individual partitions using the Alarm.com app:
- Log in to the Alarm.com app.
- In the Security System card, swipe to navigate to the partition to adjust. Then tap to select the partition.
Note: The arming states can also be changed from the Security System page by tappingin the Security System card. - Tap to select the desired arming state.