Alarm.com Smart Thermostat (ADC-T2000)

Device Image
Manufacturer	Alarm.com
Power	4 AA batteries or 24 VAC
Z-Wave Security 2 (S2)	Yes (firmware version 2.01+ required)
Z-Wave SmartStart	Yes (firmware version 2.01+ required)
Local Thermostat Schedules	No
Alarm.com Auto Mode	Yes (not available on 2GIG 1.9 and below and Interlogix modules without Z-Wave Locks OTA or below v170 firmware)
Mate Button Location	Set thermostat to Off mode, then press and hold until white wireless icon illuminates to pair with Z-Wave network.
Reset Option	Important: This action will clear Z-Wave network information from the thermostat. It is recommended to delete the thermostat from the Z-Wave network prior to resetting, if possible. Put the thermostat into OFF mode (no symbols shown below temperature display). Once in OFF mode, press and hold the arrow button until a version displays (does not matter which version type is displayed). Once the version displays, press and hold until RST is displayed. When RST clears from the screen, the thermostat will have had its configuration reset to factory default.