| Device Image |
 |
| Manufacturer |
Kwikset |
| User Code Limit |
None: this lock replaces the back portion of a customer's existing deadbolt and has no keypad. |
| Digits in User Code |
None: this lock replaces the back portion of a customer's existing deadbolt and has no keypad. |
| S2 |
No. |
| Keypad Layout |
None: this lock replaces the back portion of a customer's existing deadbolt and has no keypad. |
| Auto Re-lock Option |
Yes. |
| Mate Button Location |
The Z-Wave Mate button is the A button, which is found on the upper left side of the Interior panel after removing the cover. |
| Removable Z-Wave Card |
Yes, under back cover on rim in front of battery cartridge. |
| Factory Reset Method |
Remove battery pack. Press and hold the program button on the back of the lock while reinserting the battery pack. Continue to hold the program button until you hear 1 long beep (this will take apx. 30 seconds). Release the program button. You will hear 1 long beep accompanied by a flashing red LED. Shortly after you will hear 3 short beeps followed by 2 long beeps and a quick flash of green LED. The lock has now been factory reset. |
| Handing Process |
Handing process should happen automatically on this model when batteries first installed. If it fails, or is incorrect, follow factory reset instructions above. |
Compatibility Alert
The Kwikset Convert Smart Lock Conversion Kit replaces the inside half of a customer's existing deadbolt and does not have a keypad. For questions about deadbolt hardware compatibility, refer to the manufacturer.