PoE to Wi-Fi Bridge (ADC-W110)

Device image
Enrollment methods	Connects to Internet via WPS mode or AP mode Connect devices to it via Ethernet
Ethernet compatibility	Has 10/100Mbps RJ-45 Ethernet port Compatible with IEEE 802.3AF PoE standard
Wi-Fi compatibility	IEEE 802.11 b/g/n, 2.4 GHz single band WLAN Wi-Fi connections
Factory Reset	Location: Communication button on the front of the W110 Procedure: Press and hold the Communication button for 12 seconds or until and begin to flash red Caution: This will restore factory-default settings to the device.

Does the PoE to Wi-Fi Bridge (ADC-W110) work with 5 GHz Wi-Fi signals?The PoE to Wi‑Fi Bridge model ADC‑W110 supports only 2.4 GHz Wi‑Fi connectivity.

Is it possible to connect a switch with one or more cameras to an ADC-W110?No. Each camera must be connected directly to its own respective ADC-W110 in order to function properly. Connecting a switch with one or more cameras to the ADC-W110 is not a supported configuration.