Skip to main content
Knowledge Base

1080p Outdoor Wi-Fi Camera (ADC-V723/723X) - Data Sheet

Get smarter video alerts and high-quality live and recorded video with the ADC-V723/723X. Powerful Video Analytics from Alarm.com can detect and alert you to people, vehicles, and animals entering your property. With a wide field of view, night vision, and High Dynamic Range (HDR), the ADC-V723/723X lets you see what’s important – no matter the time of day or lighting conditions. Pair with an Alarm.com Stream Video Recorder for 24/7 local recording or with an Alarm.com security system for cloud-based alarm and sensor-triggered clip recordings (additional hardware required).

Note: There is no functional difference between the V723/V723X and their features. V723X replaced V723 anywhere the cameras' model/SKU numbers appear. 

Data sheet V723 image.PNG

Features

Included Accessories

  • Power adapter
  • Mounting hardware

Specifications

Recording compression H.264
Ingress protection IP66
Max resolution 1920 x 1080
Image sensor 1/2.7” CMOS, 2.1 MP, 1920 x 1080
Lens/angle of view 3.0 mm, F2.0, 117°
Low-light sensitivity 0 lux with IR
IR range Up to ~40 ft (12 m)
Image adjustments Flip, brightness, contrast, saturation, sharpness, exposure
Wireless connectivity 802.11 b/g/n/ac, 2.4 & 5 GHz
Wireless encryption WEP, WPA, WPA2, WPA3 (requires firmware version 0.6.2.540+)
Operating temperature -13°F - 113°F (-25°C - 45°C)
Operating humidity <95% Non-condensing
Dimensions (L x W x H) (L x W x H) 2.5 x 2.5 x 4.5” (6.4 x 6.4 x 11.4 cm)

For Internet service and bandwidth requirements, see What are the internet service and bandwidth requirements for Alarm.com video devices?.

For information about frame rate (FPS), see What is the frame rate for video?.

Requirements

Power 12 V - 1 A DC power adapter (included)
Network Wi-Fi (2.4 or 5 GHz) connection to broadband Internet

LED guide

Status LED
LED pattern Description
OffOff.svg Power off
Flashing redLED blinking red.svg Power on, camera booting
Flashing greenLED blinking green.svg Local network connection
Solid greenLED solid green.svg Connected to Alarm.com
Flashing blueLED blinking blue.svg WPS mode
Flashing whiteLED blinking white.svg Wi-Fi access point mode
Trouble condition
LED pattern Description
Solid redLED solid red.svg No local or Internet connection
Factory reset
LED pattern Description
Flashing red and greenLED alternating red green.svg

Camera resetting to factory default

Reset Procedure:

  1. Press and hold the reset/WPS button Reset_WPS_icon_resized.png located on the bottom of the camera until the LED is flashing Green and Red (about 15 seconds), then release the button.
  2. The camera will reboot with factory default settings.

 

Interested in Alarm.com?

Alarm.com technology is sold, installed, and serviced by licensed service providers near you.

 

Let's Get Started