Yale Pro® 2 Interconnected Lock (YMC614, YMC624, YMC634, YMC654)
Quick facts
| Device Images | YMC614 - Keyed Push Button:
  YMC624 - Keyed Touchscreen:   YMC634 - Key-Free Push Button:   YMC654 - Key-Free Touchscreen:   |
|---|---|
| Manufacturer | Yale |
| User Code Limit | 500 |
| Digits in User Code | 4-8 |
| Keypad Layout | 1 number per key |
| Auto Re-Lock Option | Compatible |
| Removable Z-Wave Card | Compatible |
| Z-Wave Security 2 (S2) | Compatible |
| Z-Wave SmartStart | Compatible |
| Z-Wave Long Range | Compatible |
The Yale Pro® 2 Interconnected Lock gives property owners smart and secure keyless access for apartments and multi-family entry doors. Designed for regions requiring single action egress, this lock combines the simplicity of a deadbolt with keyless convenience, allowing residents to quickly enter and exit their units. For property managers, the Pro 2 integrates effortlessly with smart property systems
For manufacturer guides, see:
- Yale Pro 2 Interconnected Lock - Keyed YMC614/YMC624 - Hardware Installation
- Yale Pro 2 Interconnected Lock - Key-free YMC634/YMC654 - Hardware Installation
- Yale Pro 2 Interconnected Lock - Quick Start Guide for Z-Wave/ZigBee
- Yale Pro 2 Interconnected Lock - Z-Wave 800 Series System Integrators Guide
Note: The Yale Pro 2 Interconnected Lock is not compatible with Qolsys panels at this time.
Enroll a Yale Pro 2 Interconnected Lock
For more information about adding Z-Wave devices, see Add Z-Wave devices.
To trigger the Yale Pro 2 Interconnected Lock for enrollment using Add Mode (S0):
- Place the Z-Wave controller into Add Mode.
- Enter the programming code, followed by the gear [⚙] key.
- Press [7], followed by the gear [⚙] key.
- Press [1], followed by the gear [⚙] key.
- Scan the QR code, if prompted, or enter the first five digits of the DSK if prompted.
- Wait 2 minutes before locally operating the device.
- Verify that the lock appears on the Alarm.com customer website or Alarm.com app and responds to lock/unlock commands.
To delete a Yale Pro 2 Interconnected Lock
- Place the Z-Wave controller into Delete Mode.
- Enter the programming code, followed by the gear [⚙] key.
- Press [7], followed by the gear [⚙] key.
- Press [3], followed by the gear [⚙] key.
To reset a Yale Pro 2 Interconnected Lock
Caution: Performing a factory reset on the lock with the Z-Wave® module installed will clear the Z-Wave® network settings, causing the device to be removed from the network.
- Remove battery cover and one battery.
- Press and hold the reset pin.
- While holding the reset pin, re-insert the removed battery.
- Keep holding the reset pin for 5 more seconds until the keypad digits illuminate.
- Replace the battery and cover.