Yale Pro® 2 Cylindrical Lock (YMB614, YMB624)
Quick facts
| Device Images | YMB614 - Keypad:
  YMB624 - Touchscreen:   |
|---|---|
| Manufacturer | Yale |
| User Code Limit | 500 |
| Digits in User Code | 4-8 |
| Keypad Layout | 1 number per key |
| Auto Re-Lock Option | Compatible |
| Removable Z-Wave Card | Compatible |
| Z-Wave Security 2 (S2) | Compatible |
| Z-Wave SmartStart | Compatible |
| Z-Wave Long Range | Compatible |
The Yale Pro® 2 Cylindrical Lock is a smart all-in-one keypad with a lever, perfect for entrances with a single door hole prep, like gyms or mailrooms. Residents and guests enjoy convenient keyless entry, while property owners gain peace of mind knowing their shared spaces are safe and secure. For property managers, the Pro 2 integrates effortlessly with smart property systems like Wi-Fi, Z-Wave Plus, and Zigbee, creating a streamlined, connected access solution across the property.
For manufacturer guides, see:
- Yale Pro 2 Cylindrical Lock - Hardware installation
- Yale Pro 2 Cylindrical Lock - Z-Wave 800 Series System Integrators Guide
Note: The Yale Pro 2 Cylindrical Lock is not compatible with Qolsys panels at this time.
Enroll a Yale Pro 2 Cylindrical Lock
For more information about adding Z-Wave devices, see Add Z-Wave devices.
To trigger the Yale Pro 2 Cylindrical Lock for enrollment using Add Mode (S0):
- Place the Z-Wave controller into Add Mode.
- Enter the programming code, followed by the gear [⚙] key.
- Press [7], followed by the gear [⚙] key.
- Press [1], followed by the gear [⚙] key.
- Scan the QR code, if prompted, or enter the first five digits of the DSK if prompted.
- Wait 2 minutes before locally operating the device.
- Verify that the lock appears on the Alarm.com customer website or Alarm.com app and responds to lock/unlock commands.
To delete a Yale Pro 2 Cylindrical Lock
- Place the Z-Wave controller into Delete Mode.
- Enter the programming code, followed by the gear [⚙] key.
- Press [7], followed by the gear [⚙] key.
- Press [3], followed by the gear [⚙] key.
To reset a Yale Pro 2 Cylindrical Lock
Caution: Performing a factory reset on the lock with the Z-Wave® module installed will clear the Z-Wave® network settings, causing the device to be removed from the network.
- Remove battery cover and one battery.
- Press and hold the reset pin.
- While holding the reset pin, re-insert the removed battery.
- Keep holding the reset pin for 5 more seconds until the keypad digits illuminate.
- Replace the battery and cover.