Baldwin Keyless Entry Deadbolt (8252/8285)

Device Image
Manufacturer	Baldwin
User Code Limit	30
Digits in User Code	4-8 Note: Codes created using the Alarm.com interface will always be 4 digits. This is the recommended method to ensure full functionality.
Keypad Layout	5 button
Auto Re-Lock Option	Yes
Removable Z-Wave Card	Yes
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Place the Z-Wave controller into Add Mode. Press the A button on the lock one time to pair it to the Z-Wave Controller.
Factory Reset	Remove the battery pack from the lock. Press and hold the Program button while re-inserting the battery pack. Continue holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button again. After 20 seconds, the status LED will flash green, and the lock will beep once to indicate it has been reset. Perform the door-handing process again.