August Smart Lock Pro
Compatibility Alert: Alarm.com is ending support for new installations of the August Smart Lock Pro effective June 21, 2021. August locks enrolled before this date will not be affected. However, installers should be aware of potential issues with S2 secure enrollment if an existing lock needs to be re-enrolled. In addition, Assa Abloy is also ending their support for the Z-Wave version August Smart Lock Pro.
For a list of alternative lock models, visit the Device Directory.
Quick facts
| Device Image |  |
|---|---|
| Manufacturer | August |
| User Code Limit | Does not support user codes; No keypad. |
| Digits in User Code | Does not support user codes; No keypad. |
| S2 |
Yes |
| Keypad Layout |
No keypad. Note: Since there is no keypad, the August Lock cannot disarm the security panel with a user code. |
| Auto Re-lock Option | Yes. This option is available and configured through the August Lock app. |
| Mate Button Location | The August Lock requires the installer to use the "August Home" mobile app to set-up and include the app into a Z-Wave network. August Tech Support notes that some Android based mobile phones are incompatible, including HTC and Motorola. The August App is available for both Android and iOS devices. Once the lock is setup on your August account, you must go to the "House" it is connected to, then click on the gear/cog icon in the lower right-hand corner, then "Lock Settings." From the "Lock Settings" list, under "Platforms" you'll find "Z-Wave Settings." |
| Removable Z-Wave Card | No |
| Factory Reset Method | This option is available through the August Lock app. |