Is there an exit delay when arming from the website or app?
The exit delay is a setting that allows users time to leave the premises after arming the system. When arming the system from the Alarm.com customer website or Alarm.com app, only some panels have an exit delay.
If compatible with having an exit delay when arming remotely, it follows the same delay as the panel, which is generally between 30 to 240 seconds unless otherwise noted. For more information about changing the panel's delay settings, see Change the alarm delay settings using the Customer app.
| Panel | Exit delay when arming from website or app |
|---|---|
| 2GIG panels (EDGE, GoControl/GC2, GC3/GC3e) | No exit delay |
| DSC Impassa | Exit delay (if the exit delay panel setting is set greater than 0) |
| DSC PowerSeries Neo / Pro | Exit delay (if the exit delay panel setting is set greater than 0) |
| Interlogix Concord 4 | No exit delay |
| Interlogix NX |
Exit delay (if the exit delay panel setting is set greater than 0) Note: The NX is the only panel that must wait for the entire exit delay before the Alarm.com customer website and Alarm.com app reflect the new arming status. |
| Interlogix Simon XT / XTi / XTi-5/i | No exit delay |
| Qolsys IQ Panel/DSC Touch | No exit delay |
| Qolsys IQ Panel 2 |
No exit delay, except when local scenes support* is enabled on a Qolsys IQ Panel 2 with software version 2.4.0+ then arming the system stay or away always follows the panel's normal exit delay even when arming remotely |
| Qolsys IQ Hub / IQ Panel 4 / IQ4 Hub / IQ Pro / IQ4 NS |
No exit delay, except when local scenes support* is enabled then arming the system stay or away always follows the panel's normal exit delay even when arming remotely |
| SEM-DSC PowerSeries | Exit delay (if the exit delay panel setting is set greater than 0) |
| SEM-Honeywell/ADEMO Vista | Exit delay (if the exit delay panel setting is set greater than 0) |
Note: * Local scenes support on Qolsys panels is only compatible with one partition. For more information about local scenes support, see the panel-specific article Run Scenes from panel.