Factory reset an ADC-V720 to its default settings
Resetting a device to its factory default settings removes all of its existing programming and memory. Most devices must be removed from the account and re-enrolled after a factory reset.
Important: Wait at least 2 minutes for the device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.
| Reset procedure | Reset button location | Reset button image |
|---|---|---|
| Hold the Reset button until the LED rapidly flashes red and green, which usually happens after 15 seconds |
The Reset button can be found inside the back of the camera. Be careful of twisting wires if opening. |
 |
Important: Once a video device has been reset, it is normal for the LED to turn off momentarily. It is best to leave the video device plugged into power and undisturbed for two minutes after performing the factory reset.