4MP Indoor/Outdoor Battery Spotlight Camera (ADC-V731B) - Data Sheet
Overview
Alarm.com’s battery-powered camera (ADC-V731B) is perfect for installations where wiring is not an option. Energy-saver Video Analytics captures clips and snapshots whenever a person, vehicle, or animal is detected, but conserves battery when there is no activity. An integrated spotlight, Two-Way Audio, and Perimeter Guard™ proactively deter unwanted behavior. For power, the V731B has a removable, rechargeable battery and works with solar panels so customers have multiple ways to charge.
Included accessories
- USB-C charging cord
- Wall Mount
Key features
- 4 MP HDR video
- Battery Saver Analytics for Person, Animals,
- and Vehicles
- Spotlight Enabled Color Night Vision
- IR night vision
- Multi-Month Battery Life
- Solar Panel Compatible
- Hubless
Specifications
| Supported resolutions | 2688x1520, 1920x1080, 1280x720, 640x360 |
|---|---|
| Recording compression | H.264 |
| Ingress protection | IP65 |
| Field of view | 140º Horizontal, 90º Vertical |
| Wi-Fi connectivity |
|
| Battery capacity | 6450 mAh |
| Charging time | less than 5 hours |
| Power adapter | 20W USB-C charger capable of 12V output recommended |
| Connector | USB-C |
| Motion detection mechanism | Passive infrared sensor |
| Image sensor | 1/3" Color CMOS |
| IR range | Up to 15 feet (5 meters) |
| Image adjustments | Flip, brightness, contrast, saturation, sharpness, exposure |
| Operating temperature | -4°F to 113°F (-20°C to 45°C) |
| Charging temperature | 32°F to 113°F (0°C to 45°C) |
| Operating humidity | 20% - 100% non-condensing RH |
| Dimensions (L x W x H) | 2.2 x 2.3 x 3.9" (5.57 x 5.85 x 9.87cm) |
| Compliance | FCC, IC, CE, & RCM |
LED reference guide
When operating on battery power, the status LED will light up in response to motion or when the camera’s state is altered (i.e., button press events, booting on, firmware upgrades, and deterrence responses).
| LED pattern | Description |
|---|---|
|
Off
|
Power off or standby |
|
Solid green
|
Connected to Alarm.com |
|
Blinking green
|
Local network connection |
|
Blinking red
|
Power on, camera booting |
|
Solid red
|
No local or internet connection |
|
Solid blue
|
Low battery |
|
Blinking white
|
Wi-Fi Access Point and Bluetooth Network Association modes (press and hold the button for 3-6 seconds) |
|
Blinking blue
|
WPS mode (press and hold button for 6-9 seconds) |
|
Blinking yellow
|
Power cycling (press and hold button for 9-12 seconds) |
|
Blinking red and green
|
Reverting to factory default settings (press and hold the button for 12-15 seconds) |
|
Blinking green and blue
|
Firmware updating |
Caution: Factory resetting the device will require it to also be deleted from the customer account and re-enrolled.
Charging
In-unit charging
| LED pattern | Description |
|---|---|
|
Blinking yellow and green
|
Charging |
|
Blinking yellow and blue
|
Charging failed |
|
Solid green
|
Charged and connected to Alarm.com |
Battery pack charging
| LED pattern | Description |
|---|---|
|
Solid red
|
Charging |
|
Blinking red and blue
|
Charging failed |
|
Solid blue
|
Charged and connected to Alarm.com |
