Kwikset Obsidian Touchscreen Electronic Deadbolt

Important: The product or feature described on this page is at end of life.

Device Image
Manufacturer	Kwikset
User Code Limit	16
Digits in User Code	4 to 8
S2	No
Keypad Layout	1 digits per button (touchscreen)
Auto Re-lock Option	Yes
Mate Button Location	The Z-Wave Mate button is the A button, which is found on the upper left side of the Interior panel after removing the cover.
Removable Z-Wave Card	Yes, under back cover on rim in front of battery cartridge.
Factory Reset Method	Remove battery pack. Press and hold the program button on the back of the lock while reinserting the battery pack. Continue to hold the program button until the lock sounds one long beep (this will take about 30 seconds). Release the program button. The lock will sound one long beep accompanied by a flashing red LED. Shortly after, the lock will sound three short beeps followed by two long beeps and a quick flash of green LED. The lock has now been factory reset.
Handing Process	Handing process should happen automatically on this model when batteries first installed. If it fails, or is incorrect, follow factory reset instructions above