Enroll a Qolsys IQ Lightbulb (QZ2110-840)
The Qolsys IQ Lightbulb (QZ2110-840) can be enrolled into a Z-Wave network following the instructions below.
For more information about installing a Qolsys IQ Lightbulb (QZ2110-840), see Qolsys IQ Lightbulb (QZ2110-840) - Installation Guide.
To enroll a Qolsys IQ Lightbulb into a Z-Wave network:
- Place the Z-Wave controller into Add Mode.
- Apply power to the Qolsys IQ Lightbulb.
- The bulb will blink when added.
- If desired, edit the device’s name at the Z-Wave controller.
- Touch the add button on the Z-Wave controller to complete the pairing process.