Qolsys IQ Lightbulb (QZ2110-840)

Device Image
Manufacturer	Domitech (re-branded for Qolsys)
Power Requirements	120 VAC (via light socket)
Power	Consumes 9W
Light Output	750 Lumens (60W incandescent equivalent)
Bulb Lifetime	25,000 hours (equivalent 22.8 years based on 3 hours/day)
Dimming	Yes
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Troubleshooting Considerations	It is important that the switch controlling the light socket remain on in order to maintain power to the Z-Wave LED bulb. If the switch is turned off, then no power will be going to the bulb device and therefore no Z-Wave functionality will be available (control, repeating) The LED bulb acts as a repeater on the network, so turning off the switch to the Z-Wave LED bulb could also affect function of other devices on the network that use it as a repeater.
Z-Wave Enrollment	Using the light switch that powers the light bulb, start with the light switch off. Place the Z-Wave controller into Add Mode. Turn on the switch.