Hank Smart Plug (HKZW-SO03)

Device Image
Manufacturer	Hank
Power Requirements	120 V +/- 10%, 60 Hz
Maximum Load	1800 W
Dimming	No
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Place the Z-Wave controller into Add Mode. Apply power to the device. Push the Z-Button (below the USB ports) three times rapidly. Verify that the device shows up on the Alarm.com customer website or Alarm.com app and responds to commands to turn the device on/off.