Image Sensor Version 1 (ADC-IS-1##)
The following are some alternatives to replace Image Sensors:
- Alarm.com video cameras are an engaging alternative for customers.
- Integrated panel cameras in some panels (i.e., Qolsys IQ Panel 2, Qolsys IQ Panel 4, and 2GIG EDGE) provide similar features.
- The DSC PIR Cam is an option for IQ panels with PowerG (Peek-In, Disarm, and Alarm images are supported) and for DSC PowerSeries Neo/Pro (only Alarm Images are supported).
For questions, contact CORE Support or your Alarm.com account representative.
Quick facts
| ADC-IS-100 and 2GIG-IMAGE1 | |||||
|---|---|---|---|---|---|
| Device image | |||||
| Power source |
Optimal: 2 AA 1.5v Energizer Ultimate Lithium Batteries. Acceptable: 2 AA 1.5v alkaline batteries (battery life may be reduced significantly). |
||||
| Expected battery life |
Approximately 2 years for lithium batteries. Battery life varies by use case depending on certain factors such as weak signal strength and frequency of motion activations, image captures, and IR flashes. |
||||
| Wireless signal range | Greater than 400 feet open air | ||||
| Detection range | 35 feet x 40 feet | ||||
| Motion profiles and sensor range | Normal (up to 30 feet, default), High (up to 35 feet), Low (up to 25 feet) | ||||
| Image resolution | QVGA 320x240 pixels | ||||
| Recommended mounting height | 8 feet | ||||
| Recommended mounting angle |
6° for large coverage area and rooms greater than 30 feet (“teeth up” on mounting arm) 18° for rooms less than 30 feet (“teeth down” on mounting arm) |
||||
| Compatibility |
|
Installation guides
User guides
How-to troubleshooting guides
Frequently asked questions
Videos
The installation process follows the same instructions as the Image Sensor Version 2. For more information about installation, see the panel-specific guide in Image Sensor Version 2 (ADC-IS-2##).