2GIG GoControl Image Sensor IS-100-GC - Data Sheet

Last updated
Save as PDF

The Image Sensor (model ADC-IS-100-GC) is compatible with the 2GIG GoControl panel with firmware 1.10+. A cell radio and 900 MgHz XCVR2 transceiver are required. For the more information about the installation process, see 2GIG GoControl Image Sensor 2GIG-IMAGE1 - Installation Guide.

The Image Sensor is a breakthrough new product that combines a PIR (Passive Infrared) motion sensor, an integrated still camera, completely wireless communication, and Alarm.com Interactive Services. The Alarm.com Image Sensor offers an entirely new service to the customer designed to deliver better security through visual verification of alarms and increased engagement through on-demand property views.

It’s ETL certified, battery operated and communicates with the customer’s security control panel. Swap it for a standard motion sensor in typical installations for increased end user value, and higher account RMR. Integrated with Alarm.com Interactive Services, images are easily accessible to customers. All uploaded images are viewable on the Alarm.com Customer Website or app. Users can even receive images in text or email alerts whenever an image is uploaded—whether in the event of an alarm, or on-demand for important events.

Highlighted features

ETL certified for UL 639
35 feet by 40 feet detection coverage area
Remotely configurable PIR sensitivity
- Pet immunity, etc.
Easy installation
- Simple panel enrollment
- No broadband required; No router configuration
Tamper detection, walk test mode, supervision
Color images
Night vision
- IR illumination
- Black and white images
Wireless image transmission to panel
Wireless image transmission to Alarm.com via cellular networks

Physical data

Dimensions (L x W x H)	3.0” by 1.8” by 1.8”
Enclosure material	Fire resistant plastic (UL 94)
Enclosure color	White
Weight	3.1 oz (with batteries, w/o mounting accessories)
Operating temperature	Indoors (32-110°F for non pet applications; 60-110°F for pet applications)
Humidity	UL certified in up to 85% relative humidity
Static immunity	Yes
Sealed optics	No
RFI immunity	Yes
Tamper detection	Yes (orientation based detection)

Motion detection

Technology	Dual element PIR
Detection range	35’ x 40’
Lens type	Fresnel lens
PIR sensitivity	Remotely configurable; 3 levels
Pet immunity	Yes (up to 40 lbs.)
PIR white light immunity	Yes
Walk test mode	Yes
Post activation idle time	3 minutes (default when disarmed)

The following image is the side view of the PIR lens coverage:

The following image is the top view of the PIR lens coverage:

Camera

Camera type	CMOS
Focus	1 ft. to infinity
Night vision and capture	Yes- automatic infrared flash (invisible 240mW)
Night vision range	Optimal within 15 feet
Minimum illumination w/o IR flash	3 lux
Motion triggered images	Yes
Images on-demand	Yes

Installation

Mounting height	8 feet
Mounting angle	6°, 12°, or 18° down angle
Mounting options	Wall mounted w/ bracket (flat or corner mount)

Wireless

Frequency	900 MHz
Protocol	Proprietary, FHSS
Open air range	550 feet
Antenna	Internal wire antenna
Wireless supervision	Yes

Regulatory compliance

FCC	FCC ID: YL6-143100ISGC
IC	IC: 9111A-143100ISGC
RoHS	Compliant
ETL	Certified for UL 639 compliance

Electrical data

Operating voltage	1.8-3.5v
Current consumption (typical)	<1mA
Power requirements	2-AA 1.5v Lithium batteries
Recommended battery	Energizer Ultimate Lithium (included)
Battery life (typical)	Approximately 10 months

System compatibility

Control panel	GoControl with firmware 1.10+
Required radio	900 MgHz XCVR2 transceiver
Alarm.com base Service Package	Basic or Advanced Interactive or Interactive Gold (Images - Plus Included) required for image functionality
Alarm.com add-on	Images Alarms or Plus plan required for image functionality
Device limit	Up to 3 Image Sensors can be added per system