Skip to main content
Knowledge Base

Remotely change 2GIG GoControl panel settings

Compatible panel settings can be changed using the app. 

Note: If these options are not available, contact your service provider for more information.

To change panel settings:  

  1. Log into the app.
  2. Tap Security System.
  3. Tap configure.
  4. Tap the setting to be configured.
  5. Tap the desired value.
  6. Tap Save.

Compatible panel settings:

Setting Description
Silence Trouble Beeps at Night  If this feature is enabled then trouble conditions such as  AC loss system low battery  RF low battery fail to communicate cell radio faults will not be audible between the hour of 10 pm and 9 am. For UL 985 installations, this feature must be disabled.
Temperature Display  Select if the temperature is displayed in Fahrenheit or Celsius
Closing Acknowledgement Sound  Enable or disable the sound for an arming acknowledgment at the end of the exit delay 
Data and Time Format  Select the format date and time format

Interested in technology is sold, installed, and serviced by licensed service providers near you.


Let's Get Started