Skip to main content
Knowledge Base

Change the thermostat setpoint

The thermostat setpoint can be managed from the Alarm.com app and Alarm.com customer website so you can control the temperature on the go.

Change the thermostat setpoint

  1. Log into the Alarm.com app.
  2. In the Thermostats card, verify the thermostat is in the desired mode.
  3. Tap Upor down  to adjust the set point temperature(s).
     
    Important: When using Auto mode, the Heat (left) and Cool (right) setpoints must be separated by at least 3 degrees to prevent the thermostat from toggling constantly between heating and cooling. Setting the Cool and Heat target temperatures less than 3 degrees from each other will waste energy without providing additional comfort.
  1. Log into the Alarm.com customer website.
  2. In the Thermostats card, verify the thermostat is in the desired mode.
  3. Click Upor down to change the thermostat setpoint(s).
     
    Important: When using Auto mode, the Heat and Cool setpoints must be separated by at least 3 degrees to prevent the thermostat from toggling constantly between heating and cooling. Setting the Cool and Heat target temperatures less than 3 degrees from each other will waste energy without providing additional comfort.

    Thermostat Auto Mode Customer Site

For more information about changing the thermostat mode, see Change the thermostat mode.

Interested in Alarm.com?

Alarm.com technology is sold, installed, and serviced by licensed service providers near you.

 

Let's Get Started