Skip to main content
Knowledge Base

Mount an ADC-CSVR126 to a rack

  1. Last updated
  2. Save as PDF

The ADC-CSVR126 can be mounted to a standard server rack using the ADC-RME101 rack mount kit (sold separately). The rack mounts are designed to fit into a 1U (rack unit) area.  

Note: A rack unit is 1.75 inches/44.45 millimeters tall. Width and depth can vary.

In the box

  • Mounting brackets (x2 — one for each side)
  • Screws (x6 — three for each bracket)

Required hardware

  • ADC-CSVR126
  • ADC-RME101
  • Standard server rack
  • Server rack screws
ADCRME101.png

To mount the ADC-CSVR126 to a rack:

Note: The brackets are identical and can be attached to either side.

  1. Line up the three small holes on the mounting bracket with one side of the ADC-CSVR126.
  2. Using the included screws, attach the bracket to the ADC-CSVR126.
  3. Repeat the previous steps on the opposite side of the ADC-CSVR126.
  4. Using server rack screws, attach the ADC-CSVR126 to each side of the server rack.