4MP Outdoor Wi-Fi Spotlight Camera (ADC-V730) - Data Sheet
Key features
- 4 MP Video with High Dynamic Range (HDR)
- White Spotlight
- Onboard Recording with Smart View for continuous, local, encrypted recordings
- Video Analytics 2.0 with People, Animal, and Vehicle Detection
- Perimeter Guard™ and Manually Triggered Warning Sounds for proactive deterrence
- Two-Way Audio
- Dual-band Wi-Fi (2.4 or 5 GHz)
.png?revision=1&size=bestfit&width=300&height=300)
Included accessories
- Power adapter (10 feet)
- Mounting hardware
- Installation QR code and drill template
Optional accessories
| Accessory SKU | Accessory name |
|---|---|
| ADC-PSU-12V1.5A-OUTDOOR* | Alarm.com 12V 1.5A Waterproof Outdoor Power Supply |
*Note: Available for purchase through Alarm.com using the Partner Portal's Order Equipment page.
Specifications
| Recording Compression | H.264 |
|---|---|
| Image Sensor | 1/3”, 4 MP, HDR |
| Lens |
Focal length:
Aperture:
|
| Field of View |
|
| Max Resolution | 2688 x 1520 |
| Wi-Fi | Wi-Fi 6 (802.11b/g/n/ac/ax) with 2.4 & 5 GHz |
| Ingress Protection | IP66 |
| Dimensions (L x W x H) | 4.8 x 3.1 x 3.1" (12.2 x 7.8 x 7.8 cm) |
| IR Range | Up to ~49 ft (15 m) |
| Night Vision | IR Mode (grayscale), Spotlight Mode (color) |
| Operating Temperature | -40°F – 122°F (-40°C – 50°C) |
| Operating Humidity | <95% (non-condensing) RH |
| Power | 12 V, 1.5 A DC power adapter (included) |
Mounting accessories
| Device name | Additional information |
|---|---|
| ADC-VACC-MNT110 |
Allows compatibility with:
|
| ADC-VACC-MNTVS |
Allows compatibility with:
|
| ADC-VACC-CAM-MPA | Lines up mounting holes for easier replacement of older Alarm.com outdoor bullet cameras |
| ADC-VACC-730-BC | Fits over the standard mounting base for additional protection of the mounting screws and to provide a clean look for the mounted product |
LED reference guide
| LED pattern | Description |
|---|---|
|
Off
|
Power off |
|
Solid green
|
Connected to Alarm.com |
|
Blinking green
|
Local network connection |
|
Blinking red
|
Power on, camera booting |
|
Solid red
|
No local or internet connection |
|
Blinking white
|
Bluetooth and Wi-Fi Access Point modes (press and hold the button for 3-6 seconds) |
|
Blinking blue
|
WPS mode (press and hold button for 6-9 seconds) |
|
Blinking yellow
|
Power cycling (press and hold button for 9-12 seconds) |
|
Blinking red and green
|
Reverting to factory default settings (press and hold the button for 12-15 seconds) |
|
Blinking green and blue
|
Firmware updating |
|
Blinking red and blue
|
Perimeter Guard camera light alert activation |
