Factory reset an ADC-V723/723X to its default settings

Last updated
Save as PDF

Resetting a video device to its factory defaults removes all programming and memory from the device.

Important: Wait at least 2 minutes for the video device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.

Reset procedure	Reset button location
Press and hold the reset/WPS button located on the bottom of the camera until the LED is flashing Green and Red (about 15 seconds), then release the button. The camera will reboot with factory default settings.	The reset/WPS button is on the underside of the camera.

Important: Once a video device has been reset, it is normal for the LED to turn off momentarily. It is best to leave the video device powered on and undisturbed for 2 minutes after performing the factory reset.