GoControl Thermostat (GC-TBZ48)
Quick Facts 
| Device Image | ![]() |
|---|---|
| Manufacturer | Residential Control Systems (RCS) |
| Power | Battery or AC |
| Z-Wave Security 2 (S2) | No |
| Local Thermostat Schedules |
Yes, off by default. This model thermostat will show away underneath the temperature when the schedules are enabled. Put the TBZ48A into Simple Mode (schedule off) by holding [Mode] for 10+ seconds. The away will disappear from the screen to indicate the schedules are off. |
| Alarm.com Auto Mode | Yes (not available on 2GIG 1.9 and below and Interlogix modules without Z-Wave Locks OTA or below v170 firmware) |
| Mate Button Location |
|
| Reset Option | Under Advanced System Settings (press and hold the FAN button to get into the Setup menu. While in the Setup Menu, press and hold both the FAN and ▼ buttons for 5 seconds, scroll down to Restore Defaults, Restores all settings to factory defaults. Press Yes to restore defaults Press No to exit and not restore defaults. |

Compatibility Alert
Nice North America, LLC announced the end of sales of the Linear Thermostat (GC-TBZ48) (also known as the GoControl Z-Wave Plus Battery Powered Thermostat). Alarm.com will continue to support the installation and troubleshooting of all units in the field.
Visit the Nice North America website for additional details.