Enroll, delete, or reset a Yale Pro SL Key-Free Pushbutton Deadbolt (YRD136)
Z-Wave locks use encrypted communication over Z-Wave, meaning their communication is completely secure. With this added security, the lock and the controller must use additional Z-Wave commands to enroll and communicate. With each additional command sent, the probability of a communication breakdown increases.
For information about hardware installation, see Yale Pro SL Key-Free Pushbutton Deadbolt (YRD136) - Installation Guide.
Important: Do not add or delete user codes locally to or from the lock. Only use the Alarm.com customer website or Alarm.com app for user code management.
To mitigate the chances of enrollment failure for locks, complete the following during installation.
To enroll a Yale Pro SL Key-Free Pushbutton Deadbolt (YRD136) into a Z-Wave network:
- Place the Z-Wave controller into Add Mode.
- Remove the battery cover.
- Press the
button and hold until the lock beeps two times. - Release the button and network joining automatically begins.
- Replace battery cover.
To delete a Yale Pro SL Key-Free Pushbutton Deadbolt (YRD136) from a Z-Wave network:
- Place the Z-Wave controller into Delete Mode.
- Remove the battery cover.
- Press the button and hold until the lock beeps five times.
- Release button and network removal automatically begins.
- Replace battery cover.
To reset a Yale Pro SL Key-Free Pushbutton Deadbolt (YRD136):
- Remove the battery cover.
- Remove the batteries.
- While pressing the reset button (minimum of 3 seconds) reinstall batteries. Release reset button.
- Replace battery cover.