Schlage Encode Wi-Fi Deadbolt

To integrate the Schlage Encode account using the Alarm.com customer website: 

1. Log in to the Alarm.com customer website.
2. Click Settings.
3. Click Manage Devices.
4. Click Add Device.
5. Click Locks.
6. Click Schlage Encode.
7. Click Next.
8. Enter the Schlage Encode login credentials when prompted.
9. Accept the terms and conditions and wait for the discovery process to complete.

To integrate the Schlage Encode account using the Alarm.com app: 

1. Log in to the Alarm.com app.
2. Tap .
3. Tap Add Device.
4. Tap Locks.
5. Tap Schlage Encode.
6. Tap Next.
7. Enter the Schlage Encode login credentials when prompted.
8. Accept the terms and conditions and wait for the discovery process to complete.

1. Take off the battery cover.
2. Press and hold the reset button to the right of the thumbturn on the inside of the lock. The LED will flash red. Keep holding the button until the LED stops flashing red.
3. The LED will light solid blue when the FDR is complete. It may take up to 10 seconds before it lights.