How does the Danapad V3 control the Danalock V3 Smart Lock?
The Danapad is ready to use when it has been paired with a Danalock or Universal Module and has been set up with one or more PIN codes. For more information about pairing the Danapad with the Danalock V3 Smart Lock, see Pair a Danapad with a Danalock V3 Smart Lock.
To lock the Danalock V3 Smart Lock using the Danapad:
- Enter in a user code, then press the lock button on the Danapad.
- The Danapad will blink green to indicate success.
To unlock the Danalock V3 Smart Lock using the Danapad:
- Enter in a user code, then press the unlock button on the Danapad.
- The Danapad will blink green to indicate success.
LED signals
The keypad indicates the status of several operations with different colors:
| LED signal | LED color | Status indication |
|---|---|---|
| Single green blink |  |
Performed operation successfully |
| Single red blink |  |
Operation canceled or failed |
| Long green blink | |
Power on |
| Constant orange followed by green |  |
Firmware is being updated |
Operations
| Operation | Input action | LED response |
|---|---|---|
| Power on Danapad | Insert batteries | Display lights up green |
| Activate light only | Press unlock button | Display lights up green |
| Clear input | Hold unlock button | Display blinks red once |
| Input timeout | Input clears after 10 sec with no input | Display blinks red once |
| Danapad lockout | 5 invalid attempts causes a 2 min lockout | Display blinks red three times |
| Incorrect PIN code length | The entered PIN code is shorter than 4 digits or longer than 10 digits | Display blinks red once |