Enroll, delete, or reset a GoControl Plug-in Appliance Module (PS15EMZ5-1 or Linear PS15Z-2)
The GoControl Plug-in Appliance Module (PS15EMZ5-1 or Linear PS15Z-2) can be enrolled into or deleted from a Z-Wave network following the instructions below.
For more information about installing a GoControl Plug-in Appliance Module (PS15EMZ5-1 or Linear PS15Z-2), see GoControl Plug-in Appliance Module (PS15EMZ5-1 or Linear PS15Z-2) - Installation Guide.
To enroll a GoControl Plug-in Appliance Module into a Z-Wave network:
- Place the Z-Wave controller into Add Mode.
- Install the device in its permanent location.
- Press the program button once.
- Verify that the device shows up on Alarm.com customer website or Alarm.com app and responds to commands to turn the device on/off.
To delete and reset a GoControl Plug-in Appliance Module from a Z-Wave network:
- Place the Z-Wave controller into Delete Mode.
- Apply power to the device.
- Press the program button twice.