Skip to main content
Knowledge Base

Create/edit a thermostat temperature alert notification

A Thermostat Temperature Alert notification can notify users if an Alarm.com Smart Thermostat (Smart Thermostat HD, ADC-T3000, and ADC-T2000) or other Z-Wave thermostat reports a temperature above or below a specified temperature.

Note: There is no limit to the number of Alarm.com Temperature Sensors that can generate Temperature Alert notifications. If any PG9905 Wireless PowerG Temperature Detectors are enrolled on your account, only the first two can be selected when creating this notification.

To create a Thermostat Temperature Alert notification using the Alarm.com app:

  1. Log into the Alarm.com app.
  2. Tap Menu.
  3. Tap Notifications.
  4. Tap Settings.
  5. Tap Add.
  6. Tap to expand Use A Template.
  7. Tap Temperature Alert.
  8. Enter the name of the new notification.
  9. In When the device detects a temperature, tap to select the temperature thresholds and use the dropdown menus to specify the high and low temperatures required to generate the alert.
  10. In For the selected devices, tap to select the thermostats and/or temperature sensors to be notified about.
  11. In Recipients, tap Add to add notification recipients.
  12. Tap to select the desired recipients from the Address Book, or add an unlisted recipient by tapping Add Contact.
  13. Tap Close.
  14. Verify the notification is configured with the correct settings.
  15. Tap Save.

To create a Thermostat Temperature Alert notification using the Alarm.com customer website:

  1. Log into the Alarm.com customer website.
  2. Click Notifications.
  3. Click New Notification.
  4. Click Temperature.
  5. Click Temperature Alert.
  6. Enter the name of the new notification.
  7. In When the device detects a temperature, click to select the temperature thresholds and use the dropdown menus to specify the high and low temperatures required to generate the alert.
  8. In For the selected devices, click to select the thermostats and/or temperature sensors to be notified about.
  9. In Recipients, click Add to add notification recipients.
  10. Click to select the desired recipients from the Address Book, or add an unlisted recipient by clicking New
  11. Click Close.
  12. Verify the notification is configured with the correct settings.
  13. Click Save.

Interested in Alarm.com?

Alarm.com technology is sold, installed, and serviced by licensed service providers near you.

 

Let's Get Started