Factory reset an ADC-SVR210

Resetting a device to its factory default settings removes all of its existing programming. Most devices must be removed from the account and re-enrolled after a factory reset.

Important: Wait at least 2 minutes for the device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.

Reset procedure	Reset button location
Press-and-hold the rear [Reset] button for at least 15 seconds, until the SVR Status LED is alternating green and red, then release the Reset button. The device will then reset and reboot itself. Caution: The process of factory resetting the ADC-SVR210 and removing it from the account erases all footage from the drive.	The [Reset] button is on the back of the SVR.