Factory reset an ADC-SVR122 to its default settings

Last updated
Save as PDF

Resetting a device to its factory default settings removes all of its existing programming. Most devices must be removed from the account and re-enrolled after a factory reset.

Important: Wait at least 2 minutes for the device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.

Reset procedure	Reset button location	Reset button image
Press and hold the [Reset] button until the status LED on the front rapidly flashes red and green which usually happens after 15 seconds. Caution: The process of factory resetting the ADC-SVR122 and removing it from the account erases all footage from the drive.	The Reset button is on the back of the SVR.

Reset procedure

Reset button location

Reset button image

Press and hold the [Reset] button until the status LED on the front rapidly flashes red and green which usually happens after 15 seconds.

Caution: The process of factory resetting the ADC-SVR122 and removing it from the account erases all footage from the drive.

The Reset button is on the back of the SVR.

Important: Once a video device has been reset, it's normal for the LED to turn off momentarily. It is best to leave the video device plugged into power and undisturbed for two minutes after performing the factory reset.