Adjust the lens angle of the ADC-VC825

To adjust the lens angle:

1. Take off the dome cover.
2. Adjust the pitch (forward/backward) or yaw (left/right) of the lens.
   • For Pitch adjustment:
     1. Loosen the two screws on either side of the lens housing.
     2. Adjust the lens by hand.
     3. Tighten the screws.
   • For yaw adjustment:
     1. Loosen the three screws around the lens (they are facing the same direction as the lens).
     2. Rotate the lens by hand.
     3. Tighten the screws.
3. Replace the dome cover.