Factory reset an ADC-V510 to its default settings

Resetting a device to its factory default settings removes all of its existing programming and memory. Most devices must be removed from the account and re-enrolled after a factory reset.

Important: Wait at least 2 minutes for the device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.

Reset procedure	Reset button location	Reset button image
Hold the [Reset] button until the LED rapidly flashes red, which usually happens after 60 seconds.	The [Reset] button can be found in the pinhole on the back bottom left corner of the device.

Important: Once a video device has been reset, it is normal for the LED to turn off momentarily. It is best to leave the video device plugged into power and undisturbed for two minutes after performing the factory reset.