What do the LEDs on the ADC-VDB780B mean?
LED Guide
- Top LED
- Button LED
.png?revision=2)
Button light guide
Note: The ADC-VDB780B is a battery-powered device, and the LEDs do not stay lit to help conserve power. For more information, see Can the ADC-VDB780B's LED stay illuminated?.
Operational States
| Mode | Description | Button LED behavior |
|---|---|---|
| Standby or off |
The camera is in standby mode (normal operation) or the battery is drained and requires recharging. |
Off
|
| Local connection |
The camera has a local network connection. |
Solid green
|
| No local connection |
The camera does not have a local network connection. |
Solid red
|
| Low battery |
The camera's battery is low and requires a recharge. |
Alternating red and blue
|
| Connecting to network |
The camera is powered on and connecting to the network. |
Blinking red
|
| WPS mode |
The camera is in WPS pairing mode. To enter this mode, press and hold the button for 30-45 seconds. |
Blinking blue
|
| AP mode |
The camera is in AP pairing mode. To enter this mode, press and hold the button for 46-60 seconds. |
Blinking white
|
| Power cycle |
The camera is being power cycled. To enter this mode, press and hold the button for 61-75 seconds. |
Blinking yellow
|
| Factory reset |
The camera resetting to factory default. To enter this mode, press and hold the button for 76-180 seconds. |
Alternating red and green
|
| Firmware upgrade |
The camera's firmware is being upgraded. |
Blinking yellow rapidly
|
Charging States
| Mode description | Top LED Behavior | Button LED behavior |
|---|---|---|
|
Charging The battery pack is plugged in and charging. |
Solid orange
|
On button press Solid green =
Solid yellow =
Alternating red and blue = <20% charged
|
|
Fully charged The battery pack is fully charged. |
Solid green
|
On button press, solid green
|
|
Failure charging The battery pack stopped charging because the device was plugged in too long. This may signal that there is an issue with your battery pack. Remove the charging cabled and re-attempt charging after an hour. If you see the same behavior, please contact your provider. |
Alternating orange and green
|
Alternating red and white
|
|
Operational temperature range for charging exceeded The battery pack's internal temperature is either too hot or too cold. Please charge the battery pack in a room-temperature environment. |
Solid green or solid orange
|
Alternating red and yellow
or Alternating red and white
|
