Wire two ADC-VDB750s to a mechanical chime

Last updated
Save as PDF

Two ADC-VDB750s can be wired in parallel to a single mechanical chime. This type of installation requires a doorbell transformer rated 16VAC, 20VA minimum.

Note: For more information about enrolling the ADC-VDB750s, see Alarm.com Video Doorbell (ADC-VDB750) - Installation Guide.

Wire two ADC-VDB750s to one mechanical chime

Important: Digital chimes do not support this wiring configuration.

Wiring	Diagram
Wire one terminal from each ADC-VDB750 to the transformer. Wire the other terminal from the first ADC-VDB750 to the FRONT terminal on the chime. Wire the other terminal from the second ADC-VDB750 to the REAR terminal on the chime. Wire one terminal of the transformer to the TRANS terminal on the chime.