Alarm.com Video Doorbell (ADC-VDB750) - Data Sheet
Overview
Introducing the latest addition to Alarm.com's family of video doorbells — the ADC-VDB750. This doorbell offers crystal clear 2MP picture and an expansive 165° horizontal and 145° vertical Field of View so customers can see and do more at the front door.
Alarm.com's powerful People Detection and crisp Two-Way Audio help reduce false notifications while bringing increased awareness and allowing users to communicate with visitors. Plus - a wide range of operating temperatures increase install flexibility making this a great choice in any environment.
Features
- Expansive 165° horizontal and 145° vertical Field of View ensures customers get a full picture of what's happening at their front door
- Video Analytics with rapid People Detection for faster, more relevant alerts and fewer false notifications
- Full HD resolution, High Dynamic Range (HDR), and infrared night vision
- Two-Way Audio
- Compatible with the Alarm.com Smart Chime (W115C)
- 2MP live video and saved clip viewing via the app and customer website
- Dual antenna (2x2 MIMO) Wi-Fi for improved range (2.4 GHz and 5 GHz)
Included accessories
- ADC-VDB750 video doorbell
- ADC-VDB750 wallplate (with pre-assembled set screw and wire terminal screws)
- Wall anchors (x2) & ST3.5 x 22mm screws (x2)
- A 22 Ohm 5 Watt flameproof resistor with 5% tolerance for installations with mechanical chimes, if needed
Specifications
| Recording compression | H.264 |
|---|---|
| Ingress protection | IP65 |
| Max resolution | 1440 x 1440 |
| Image sensor | 1/2.4", 2.36 MP, HDR |
| Lens/angle of view | 165° horizontal, 145° vertical |
| Low-light sensitivity | 0 lux with IR |
| IR range | Up to 15 feet (5 meters) |
| Image adjustments | Flip, brightness, contrast, saturation, sharpness, exposure |
| Wireless connectivity | 802.11 b/g/n/ac, 2.4 & 5 GHz |
| Operating temperature | -58°F - 122°F (-50°C - 50°C) |
| Operating humidity | < 95% (noncondensing) RH |
| Dimensions (W x L x D) | 1.5 x 4.81 x 1.18" assembled with back plate (38 x 122 x 30 mm) |
| Activity Detection | Advanced Video Analytics for People Detection |
| Audio | Two-Way Audio (Full Duplex) |
Power requirements
| AC transformer | 16-24 VAC, 10-40VA (16VAC, 10VA recommended) |
|---|---|
| DC transformer | 15-24 VDC, 6-20W |
Status light guide
| LED pattern | Description |
|---|---|
|
Off
|
Power off |
|
Blinking yellow
|
Camera power cycling (press and hold button for 40-45 seconds) |
|
Solid red
|
No local or Internet connection |
|
Blinking red
|
Power on, camera booting |
|
Alternating red and green
|
Camera resetting to factory default (press and hold button for 45-50 seconds) |
|
Solid green
|
Connected to Alarm.com |
|
Blinking green
|
Local network connection |
|
Blinking blue
|
WPS mode (press and hold button for 30-35 seconds) |
|
Double-blinking blue
|
Unable to ring indoor chime On firmware version 02093+, this will occur when the button has been pressed more than 3 times within 60 seconds and the doorbell is not receiving sufficient power from the circuit to ring the indoor chime. |
|
Blinking white
|
Wi-Fi Access Point mode (press and hold button for 35-40 seconds) |
|
Alternating blue and green
|
Firmware update |
