Skip to main content
Knowledge Base

Factory reset an ADC-VDB755P to its default settings

  1. Last updated
  2. Save as PDF

Important: Wait at least two minutes for the video device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.

Factory reset procedure Factory reset button location
  1. Press and hold the doorbell button for at least 45-50 seconds until the LED starts blinking red and green.
  2. Wait for the device to reboot.
 The doorbell button on the front of the ADC-VDB755P.

Caution: Resetting a video device to its factory defaults removes all programming from the device and requires it to be deleted from the customer account and re-enrolled.

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    User Guide
    Product area
    Video
  2. Tags
    1. clear
    2. doorbell
    3. memory
    4. vdb755p
sp; `; const shareLink = document.createElement('li'); shareLink.classList.add('share-link'); shareLink.innerHTML = buttonMarkup; shareLink.addEventListener('click', copyLocation); elmMetaTop.appendChild(shareLink); } if (location.pathname.startsWith('/Customer')) window.addEventListener('DOMContentLoaded', createShareButton);