Are there additional mounting brackets for the ADC-VDB755P?
Yes. Additional mounting brackets for the ADC-VDB755P include the Single-gang Mounting Plate Kit (ADC-VDBA-755P-MNT), the Wedge Mount Kit (ADC-VDBA-755P-WMK) that includes two additional wedge types, and the Flush Mount Kit (ADC-VDBA-755P-FMK) to enable clean, in-wall installations.
The additional wedges allow the user to achieve more extreme left/right pans for installation on walls perpendicular to the door. It also adds different options for tilt combined with left/right pan to allow for expanded vFoV to the ground, minimizing the blind spot at the bottom of the field of view to capture smaller packages.
Important: The correct wedge type must be selected after installing a new mounting bracket. For more information about how to choose the wedge type, see Enable the wedge setting for the ADC-VDB755P.
Wedge mount kit (ADC-VDBA-755P-WMK)
| Bracket name | Angle | Bracket image |
|---|---|---|
| A | 5° tilt down |   |
| B | 15° left or right |
|
Flush Mount Kit (ADC-VDBA-755P-FMK)
| Mount Kit accessory | Dimensions | Mount Kit accessory image |
|---|---|---|
| Flush Mount wall box | Recommended wall cutout: 3.2" x 4.8" |
 |
| Flush Mount front faceplate | 6.2" x 4.2" |  |
Single-gang mounting plate kit (ADC-VDBA-755P-MNT)
| Bracket name | Angle | Bracket image |
|---|---|---|
| Flat adapter backplate | 0° |
|
| Wall plate cover | - |
|
Screw usage guide included in the ADC-VDBA-755P-MNT kit:
The ADC-VDBA-755P-MNT includes a flat adapter that can be used for installations where the single-gang box is installed in a way that requires the adapter for the ADC-VDB755P to be installed flush with the wall plate.
Note: Only one screw set, A or B, needs to be used; two different lengths are provided for the installer's preference. Screw sets C and D are optional only if the installer wants to install the wedge or flat adapter on top of the wall plate.
Screw set A:
- Screw size: 6-32 x 1.5"
- Standard Installation: Use to screw the VDB755P and wall plate to the junction box.
- Wedge or Flat Adapter Installation: Use to screw the wall plate to the junction box.
Screw set B:
- Screw size: 6-32 x .75"
- Standard Installation: Use to screw the VDB755P and wall plate to the junction box.
- Wedge or Flat Adapter Installation: Use to screw the wall plate to the junction box.
Screw set C (optional):
- Screw size: 3.5mm x 10mm
- Wedge or Flat Adapter Installation: Use to screw the wedge or flat adapter to the wall plate using the diagonally oriented threaded inserts.
Screw set D (optional):
- Screw size: 3.5mm x 6mm
- Wedge or Flat Adapter Installation: Use to screw the VDB755P to the wedge or flat adapter.